Image Gallery
More In Spec Production, with capacities equal to or greater than a 6'x20' 3 Deck Screen.
The MS612 screen was designed and and developed with an emphasis on increasing screen plant efficiency, reducing size and weight, and reducing the overall cost of ownership by increasing in spec uptime production and reducing maintenance and downtime. To the end user this means that, in many cases, the new plant has greater efficiency, is lighter in weight and requires a considerably smaller footprint to run.
Also available with a 36" feeder module.
Powered by two 13 HP Electric Vibrating Motors the screen requires about half of the power of its larger counterparts 26 hp versus 50 hp and almost no maintenance. It requires just two shots of grease twice a year, considerably less than 1 tube of grease every 12 hours in traditional screening. And since there is no eccentric shaft, bearings, gears, seals, sheaves or guards to replace, there’s less to break down and no inventory to warehouse.
Screen cloth is easier to change because the decks are all end tension, are easily accessible from the ends of the screen and contain fewer components. 24 screen bolts, washers and nuts and no clamp bars compared to 120 nuts bolts and washers to tighten and 30 clamp bars on a traditional screen. You can install the middle deck without removing the top deck and there are also side access ports for maintenance.
See the video here.
Feeder Screen Configuration