ELRUS Closed Circuit Crushing Plant

Chassis features:

• ELRUS HD 16 wheel suspension
• Six (6) blocking legs
• Airbrakes, running lights, and mud flaps
• Fixed walkway on both sides of cone with hand rails and kick plate
• Walkways and ladders both sides of screen & front cross over
• Four (4) Access ladder to chassis
• Hydraulic raise and lower screen subframe

Hydraulic Levelling System:

• Six (6) 50,000 lbs. 6" x 35" hydraulic levelling jack system

Feeder Module

Hopper:

• 8' x 13' Self relieving hopper assembly - 1/4" plate
• Approximately 15 cubic yard capacity
• Folding Wing Wall extensions
• Cantilever Hydraulic Side Dumping Grizzly (Dumps 4’ away from plant)
• Remote dump control switch for tower

Feed Belt:

• 36" x 14' removable belt feeder cartridge
• Hydraulic grease actuated take ups
• 3 ply-600 1/4" Goodyear Plylon Plus Conveyor belt with vulcanised splice
• Integral drive system
• 10 HP Torspec variable speed drive c/w remote speed control
• Eurodrive gear reducer 63:1 reduction
• #140 Chain drive to head pulley
• Pit Viper Belt scraper

Screen Module

ELRUS 6’X14’ 3 Deck High Capacity Screen:

• Multi Sloped design

Discharge Chutes:

• Material confinement chute system
• Flop gate to divert material directly to cone or to second cross conveyor

Sandvik CH430 Cone Crusher

• ASRi ll computer automated cone control
• 200 hp TEFC motor @ 1800 RPM, sheaves, v-belts
• Floating subframe & motor mount for cone c/w 4 rubber compression mounts
• Clamp-on cone feed hopper c/w Overflow chute to return conveyor
• Guard for cone drive
• Air to Oil cooler c/w temperature control shutters
• Positive pressure air pump mounted on Chassis

Conveyors

#1 - 36” x 48’ Under Cone / Screen Feed Conveyor

• 16” 20 hp Vandergraf motorized head pulley
• 12" mine duty Chevron tail pulley c/w 2-7/16" Sealmaster MP ball bearings
• Hydraulic Grease actuated take-ups
• 20° 5” CEMA C Troughing idlers under cone hopper
• 28° 5” CEMA C Troughing idlers @ 36” centres
• 35° 5” CEMA C Troughing idlers @ 36” centres
• 5” CEMA C Self cleaning return rollers @ 10’ centres
• Under cone hopper – Rock box style – bolt on 1” wear plates
• Goodyear Plylon 3 ply - 3/16" x 1/16" Conveyor belt, vulcanised splice
• V plow
• Full tail pulley guarding

#2 - 30” x 29’ Cone Return Conveyor

• 16” 10 hp Vandergraf motorized head pulley
• 12" mine duty Chevron tail pulley c/w 2-7/16” Sealmaster MP ball bearings
• Hydraulic Grease actuated take-ups
• 20° 5” CEMA C Troughing idlers under receiving hopper – 4 Impact sets
• 28° 5” CEMA C Troughing idlers @ 36” centres
• 35° 5” CEMA C Troughing idlers @ 36” centres
• 5” CEMA C Self cleaning return rollers @ 9’ centres
• Receiving hopper – Rock box style – bolt on 1” wear plates
• Goodyear Plylon 3 ply - 3/16" x 1/16" Conveyor belt, vulcanised splice
• V plow
• Full tail pulley guarding
• Hydraulic side shift top & bottom for operating and travel positions
• Hydraulic front back shift for operating and travel positions
• Two (2) cylinders with control valve

Tramp Metal Protection Magnet:

• Suspended above feed conveyor on removable frame

#3 - 30" x 17’ Underscreen Conveyor – Adjustable Height

• 10 hp Vandergraf motorized head pulley
• 12” mine duty Chevron tail pulley c/w 2 7/16" Sealmaster MP ball bearings
• Hydraulic Grease actuated take ups
• 3 ply 3/16" x 1/16" Goodyear Plylon Conveyor belt
• Vulcanized splice
• Belt scraper and v plow

#4 - Two (2) 30" x 12’-6” Cross Conveyors:

• 7.5 H.P. Vandergraf motorized head pulley
• 12" mine duty Chevron tail pulley c/w 2 7/16” Sealmaster MP ball bearings
• Hydraulic Grease actuated take ups
• 3 ply 3/16" x 1/16" Goodyear Plylon Conveyor belt
• Vulcanized splice
• V plow

A closed circuit plant in action.